# Any space on the line before and after the [tag] is ignored, so you can use it to make your file more readable if you wish. [t] Example data file [h] Lacing configurations # Lacing name : spokes cross spokeDiameter [config] Standard 28 : 28 3 1.8 [config] Lightweight 24 : 24 2 1.5 # In this next example, the spoke diameter is 1.75 which is not included in the drop down list. # The calculator will change the input to 'user input' and then add the diameter. # You can reset it to the standard dropdown list by going via the system menu [config] Radial 24 : 24 0 1.75 # The other way to show lacing options is to create a data file of just the options and make it [sticky] # When it's loaded it will always be at the top, with no need to add lacing config's to every data file. [h] J Bend hubs [link] https://www.hopetech.com/_repository/1/documents/Pro5_PCD_J_Bend2(1).pdf # Edit one of these lines data lines and it will be displayed in red to alert you that it has been tampered with. [d]a=58&b=52&c=20&d=34&f=2.6&o=0&g=0&e=Hope+Pro5+100+6+Bolt&y=h&v=-624522543&w=1729257571516 [d]a=43&b=43&c=22&d=33&f=2.6&o=0&g=0&e=Hope+Pro5+100+CL&y=h&v=1554066197&w=1729257657235 [d]a=57&b=59&c=35&d=22.6&f=2.6&o=0&g=1&e=Hope+Pro5+148+6+Bolt&y=h&v=162603195&w=1729258352398 [d]a=51&b=59&c=32&d=19.6&f=2.6&o=0&g=1&e=Hope+Pro5+148+CL&y=h&v=1914472453&w=1729258414534 [h] Straight Pull hubs [link]https://www.hopetech.com/_repository/1/documents/Pro5_PCD_Straight_Pull.pdf # An example of showing the item creation date. [date] on [d]a=46&b=46&c=21&d=33&h=2&i=2&o=1&g=0&e=Hope+Pro5+100+CL+SP&y=h&v=-214562313&w=1729271766503 [d]a=46&b=61&c=31.7&d=17.5&h=2.3&i=2&o=1&g=1&e=Hope+Pro5+135+CL+SP&y=h&v=-267220995&w=1729272197379 [h] Rims [c] I haven't measured these, just taken the values from the DT website. [d]j=563&r=DT+EX+511+27.5&y=r&v=-1194934239&w=1729272555989 [d]j=601&r=DT+XM+481+29&y=r&v=-1880388245&w=1729272666027 [d]j=567&k=4&r=My+Asym+rim&y=r&v=-365758643&w=1729281860483 [date] off [h] Wheels [d]a=43&b=43&c=22&d=33&f=2.6&j=563&n=28&s=3&t=3&u=1.8&R=1.8&o=0&g=0&e=Hope+Pro5+100+CL&r=DT+EX+511+27.5&y=w&v=-199136652&w=1729272874326 [d]a=57&b=59&c=35&d=22.6&f=2.6&j=563&n=28&s=3&t=3&u=1.8&R=1.8&o=0&g=1&e=Hope+Pro5+148+6+Bolt&r=DT+EX+511+27.5&y=w&v=-1130150159&w=1729272945332 [d]a=46&b=61&c=31.7&d=17.5&h=2.3&i=2&j=601&n=24&s=2&t=2&u=1.5&R=1.5&o=1&g=1&e=Hope+Pro5+135+CL+SP&r=DT+XM+481+29&y=w&v=260127005&w=1729280508022 # The following line is disabled with the # symbol. #[d]a=45&b=45&c=30&d=30&f=2.6&j=540&n=32&s=3&t=3&u=1.8&R=1.8&o=0&g=0&e=Shimano+XT&r=Mavic+X517&y=w&v=1444174780&w=1729502750741 # This is an internal comment. This is also an internal comment, the # character is optional.